Regularly check the fixed parts: check the fixed bolts and connecting parts of the bell-shaped cover every 1-2 months to make sure that they are tightened without loosening and prevent them from falling off due to vibration.

Clean the inside and outside of the bell-type cover: Clean the inside and outside of the bell-type cover regularly of dust, oil and foreign matter, and keep it well ventilated, so as to avoid poor heat dissipation affecting the operation of the equipment.

Check the surface coating: If the surface of bell-shaped cover is coated or anodized, regularly check whether there is any flaking or corrosion phenomenon, and repair or re-treat it if necessary.

Prevent mechanical damage: avoid the bell-shaped cover from external impact or extrusion to prevent deformation or damage.

Maintenance and care of star elastic coupling

Regular check of elastomer: check the wear of elastomer every 3-6 months, if cracks, deformation or serious wear are found, it should be replaced in time.

Check alignment: Check the alignment accuracy of the coupling regularly to ensure that axial, radial and angular deviations are within the allowable range to avoid additional vibration and wear caused by poor alignment.

Clean the surface of the coupling: Clean the surface of the coupling regularly of dust and oil, keep it clean to avoid debris from entering and affecting the performance.

Avoid overloaded operation: Ensure that the coupling operates within the rated torque and speed range to avoid overloading that may cause damage to the elastomer.